Compare Models

Home › Brands › Compare Models

2025 John Deere 7R 330 w/o Receiver in Grand Rapids, Minnesota — 2025 John Deere 7R 330 w/o Receiver

View Details

Specs
Features

General Information

Manufacturer

John Deere

Model Year

2025

Model

7R 330 w/o Receiver

Model Code

8060RW

Color

Green

Body

Cab

Glass area - 70.61 sq. ft. (6.56 m²)

Inner volume - 114 cu. ft. (3.24 m³)

Glass area - 70.61 sq. ft. (6.56 m²)

Inner volume - 114 cu. ft. (3.24 m³)

Seat Adjustment

Standard Instructional

Degree of seat swivel, right hand - 40 degree

Air suspension

Standard Instructional

Degree of seat swivel, right hand - 40 degree

Air suspension

Drivetrain

Transmission

John Deere e23™ 26 mph (42 km/h)

Steering

Hydraulic power with electric pump back-up

Axles

Front - 1300 Series MFWD

Front Differential lock - Limited slip

Rear - Rack-and-pinion or flange

Rear Differential lock - Full-locking electrohydraulic

Rear axle final drive type - Inboard planetary three pinion

Front - 1300 Series MFWD

Front Differential lock - Limited slip

Rear - Rack-and-pinion or flange

Rear Differential lock - Full-locking electrohydraulic

Rear axle final drive type - Inboard planetary three pinion

Tires

Rear - RCI Group 48 / 49

Front axle tread range - MFWD - 60 - 88 in. (1,524 - 2,235 mm)

Rear - RCI Group 48 / 49

Front axle tread range - MFWD - 60 - 88 in. (1,524 - 2,235 mm)

Electrical

Electrical System

Seven-pin connector

Working lights - 18 halogen, 18 LED or 22 LED

Type of bulb in headlight - 65W halogen, LED

Seven-pin connector

Working lights - 18 halogen, 18 LED or 22 LED

Type of bulb in headlight - 65W halogen, LED

Instrumentation

Display - 4100 Generation 4 CommandCenter™ - 10 in. (25.4 cm)

Radio - AM / FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna

Display - 4100 Generation 4 CommandCenter™ - 10 in. (25.4 cm)

Radio - AM / FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna

Alternator

210A

Total cold cranking amps - 1,850 CCA With two 925 CCA group 31 batteries

210A

Total cold cranking amps - 1,850 CCA With two 925 CCA group 31 batteries

Engine

Engine Type

Diesel, in-line, wet-sleeve cylinder liners with 4 valves in head

Rated speed - 2,100 rpm

Emission level - Final Tier 4

After treatment type - Diesel Oxidation Catalyst (DOC) / Diesel Particulate Filter (DPF)

Diesel, in-line, wet-sleeve cylinder liners with 4 valves in head

Rated speed - 2,100 rpm

Emission level - Final Tier 4

After treatment type - Diesel Oxidation Catalyst (DOC) / Diesel Particulate Filter (DPF)

Aspiration

Single turbocharger, variable geometry turbo

Torque

Engine peak - 1,139 ft. lb. (1,545 Nm) @ 1,600 rpm

PTO rise - 40 percent

Engine peak - 1,139 ft. lb. (1,545 Nm) @ 1,600 rpm

PTO rise - 40 percent

Gross Horsepower

Rated - 330 hp (243kW) ECE-R120

Maximum - 363 hp (267kW) ECE-R120

Power boost - 30 hp (27kW) IPM

Rated - 330 hp (243kW) ECE-R120

Maximum - 363 hp (267kW) ECE-R120

Power boost - 30 hp (27kW) IPM

Cylinders

Engine Model

Family - MJDXL09.0319

Engine Make

John Deere PowerTech™ (B20 Diesel Compatible)

Displacement

9.0 l (549 ci)

Fuel Tank Capacity

e23™ - 122 US gal. (463 l)

Crankcase oil volume - 6.1 US gal. (23 l)

Diesel Exhaust Fluid (DEF) tank - 6.9 US gal. (26.2 l)

Cooling system - 11.8 US gal. (44.5 l)

Transmission-hydraulic system - 42.3 US gal. (160 l)

e23™ - 122 US gal. (463 l)

Crankcase oil volume - 6.1 US gal. (23 l)

Diesel Exhaust Fluid (DEF) tank - 6.9 US gal. (26.2 l)

Cooling system - 11.8 US gal. (44.5 l)

Transmission-hydraulic system - 42.3 US gal. (160 l)

Hydraulics

Pump

Number of rear Selective Control Valves (SCVs) - Four SCVs

Number of front Selective Control Valves (SCVs) - One with front hitch

Number of rear Selective Control Valves (SCVs) - Four SCVs

Number of front Selective Control Valves (SCVs) - One with front hitch

Standard Pump Flow

Rated output - 63 cc pump: 43 gpm (162 lpm)

Available flow at a single rear SCV - 35 gpm (132 lpm)

Available flow at front SCVs - 33 gpm (126 lpm)

Rated output - 63 cc pump: 43 gpm (162 lpm)

Available flow at a single rear SCV - 35 gpm (132 lpm)

Available flow at front SCVs - 33 gpm (126 lpm)

Hydraulic System

Closed-center, pressure / flow compensated system with load sensing

SCV control - Electronic

Closed-center, pressure / flow compensated system with load sensing

SCV control - Electronic

Measurements

Length

Overall - 218 in. (5,540 mm)

Wheelbase

115.2 in. (2,925 mm)

Weight

Base machine - e23, TLS, 18.4R46 - 22,000 lb. (10,000 kg)

Maximum ballast level - 135 lb. (61.2 kg) SAE PTO hp

Base machine - e23, TLS, 18.4R46 - 22,000 lb. (10,000 kg)

Maximum ballast level - 135 lb. (61.2 kg) SAE PTO hp

Ground Clearance

Drawbar Group 48 rear tires - 16.3 in. (415 mm)

Group 49 rear tires - 18.1 in. (461 mm)

Drawbar Group 48 rear tires - 16.3 in. (415 mm)

Group 49 rear tires - 18.1 in. (461 mm)

Operational

Power Take-Off

Independent

1.75 in. (44.45 mm) 20-spline, 1,000 rpm

Actuation - Electric switch with adjustable modulation

Front - 1.375 in. (35 mm) 21 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)

Independent

1.75 in. (44.45 mm) 20-spline, 1,000 rpm

Actuation - Electric switch with adjustable modulation

Front - 1.375 in. (35 mm) 21 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)

PTO Speed

540 / 1,000 PTO rpm @ 1,950 engine rpm

1,000 PTO rpm @ 1,940 engine rpm

540 / 1,000 PTO rpm @ 1,950 engine rpm

1,000 PTO rpm @ 1,940 engine rpm

PTO Horsepower

Rated (SAE) - 260 hp (193kW)

Hitch

Front - Category 3N, ground engaging

Rear category (SAE designation) - Category 3N / 3 with Quik-Coupler

Sensing type - Electrohydraulic

Drawbar - Category 4

Drawbar maximum vertical load - Category 3: 4.050 lb. (1,837 kg)

Front - Category 3N, ground engaging

Rear category (SAE designation) - Category 3N / 3 with Quik-Coupler

Sensing type - Electrohydraulic

Drawbar - Category 4

Drawbar maximum vertical load - Category 3: 4.050 lb. (1,837 kg)

Lift Capacity

Standard - 11,464 lb. (5,200 kg)

Maximum behind lift points - Category 3 - 15,200 lb. (6,894 kg)

Standard - 11,464 lb. (5,200 kg)

Maximum behind lift points - Category 3 - 15,200 lb. (6,894 kg)

Features

IMPROVED SELECTION CONTROL VALVE (SCV) CONFIGURATIONS: Beginning with model year 2024, 7, 8 and 9 Series tractors will feature a new SCV stack to improve performance and aftermarket serviceability. The change will further enable customers to fine-tune hydraulic flow rates and more precisely adjust the flow. This change will make it easier and more affordable to customize an SCV stack by switching coupler sizes because previously it would’ve been done by changing an entire SCV slice.
REACTIVE STEERING PROVIDES AN AUTOMOTIVE-LIKE EXPERIENCE: Is your 7R tractor the “Road Warrior” of your operation? If so, then Reactive Steering is for you. Adopted from the automotive industry, Reactive Steering brings a balanced feeling to the steering wheel much like your automobile. The load-reactive steering valve uses hydraulic inputs from both the left and right steering cylinders. When pressures increase on one side (during a turn, for instance) the valve provides feedback to the steering wheel to help assist the steering wheel back to center. On straightaways, Reactive Steering reduces hand movements by helping the operator to maintain a center line. During internal testing, hand movements are reduced by as much as 44 percent during straight line driving. Do you find it challenging to navigate roundabouts, intersections, or curvy back roads? Then Reactive Steering is a game changer. As you rotate the steering wheel to complete your turn, simply relax your grip on the wheel and notice how the steering wheel of your 7R returns to center.
7 AND 8 SERIES VISIBILITY PACKAGES LET YOU RUN WITH CONFIDENCE, DAWN UNTIL DUSK: Visibility is more than just lighting. It’s mirrors where you need them, shades for the blinding late-fall and early-spring sun, wipers to help keep all the glass clear, and integrated camera capability. The 7 and 8 Series Tractors let you choose the visibility package that best suits your needs – Select, Premium, or Ultimate with 360-degree light-emitting diode (LED) lighting –so you and your operators can run with all-conditions confidence.
EFFICIENCY AND COMFORT IN THE PALM OF YOUR HAND USING COMMANDPRO™ CONTROL: The unique driving strategy is designed to deliver highest performance in combination with operator comfort making the daily work much easier and efficient.
INCREASE PRODUCTIVITY WITH JOHN DEERE INTEGRATED SOLUTIONS: Your needs and success are the focus of John Deere. John Deere makes it easy for you to benefit from having a connected tractor in your operation. All tractors come standard with JDLink™ telematics system and users can turn on connectivity in the John Deere Operations Center™ application. With a StarFire™ Integrated Receiver and G5Plus Display, you can easily step right into advanced technology. If you’re an advanced tech user, you’ll enjoy the benefits of a highly intelligent machine connected to a full suite of solutions on the most open platform in the industry.
Fully integrated precision ag technology.
Adjustable cab suspension provides a smoother, more comfortable ride.
Industry-leading power transfer with Cat 4 HD drawbar for heavier implements.
Interval for engine oil change - 500 hr.
Interval for hydraulic / transmission oil change - 1,500 hr.
Interval for engine coolant change - 6,000 hr.
Country of manufacture - USA

Features

IMPROVED SELECTION CONTROL VALVE (SCV) CONFIGURATIONS: Beginning with model year 2024, 7, 8 and 9 Series tractors will feature a new SCV stack to improve performance and aftermarket serviceability. The change will further enable customers to fine-tune hydraulic flow rates and more precisely adjust the flow. This change will make it easier and more affordable to customize an SCV stack by switching coupler sizes because previously it would’ve been done by changing an entire SCV slice.
REACTIVE STEERING PROVIDES AN AUTOMOTIVE-LIKE EXPERIENCE: Is your 7R tractor the “Road Warrior” of your operation? If so, then Reactive Steering is for you. Adopted from the automotive industry, Reactive Steering brings a balanced feeling to the steering wheel much like your automobile. The load-reactive steering valve uses hydraulic inputs from both the left and right steering cylinders. When pressures increase on one side (during a turn, for instance) the valve provides feedback to the steering wheel to help assist the steering wheel back to center. On straightaways, Reactive Steering reduces hand movements by helping the operator to maintain a center line. During internal testing, hand movements are reduced by as much as 44 percent during straight line driving. Do you find it challenging to navigate roundabouts, intersections, or curvy back roads? Then Reactive Steering is a game changer. As you rotate the steering wheel to complete your turn, simply relax your grip on the wheel and notice how the steering wheel of your 7R returns to center.
7 AND 8 SERIES VISIBILITY PACKAGES LET YOU RUN WITH CONFIDENCE, DAWN UNTIL DUSK: Visibility is more than just lighting. It’s mirrors where you need them, shades for the blinding late-fall and early-spring sun, wipers to help keep all the glass clear, and integrated camera capability. The 7 and 8 Series Tractors let you choose the visibility package that best suits your needs – Select, Premium, or Ultimate with 360-degree light-emitting diode (LED) lighting –so you and your operators can run with all-conditions confidence.
EFFICIENCY AND COMFORT IN THE PALM OF YOUR HAND USING COMMANDPRO™ CONTROL: The unique driving strategy is designed to deliver highest performance in combination with operator comfort making the daily work much easier and efficient.
INCREASE PRODUCTIVITY WITH JOHN DEERE INTEGRATED SOLUTIONS: Your needs and success are the focus of John Deere. John Deere makes it easy for you to benefit from having a connected tractor in your operation. All tractors come standard with JDLink™ telematics system and users can turn on connectivity in the John Deere Operations Center™ application. With a StarFire™ Integrated Receiver and G5Plus Display, you can easily step right into advanced technology. If you’re an advanced tech user, you’ll enjoy the benefits of a highly intelligent machine connected to a full suite of solutions on the most open platform in the industry.
Fully integrated precision ag technology.
Adjustable cab suspension provides a smoother, more comfortable ride.
Industry-leading power transfer with Cat 4 HD drawbar for heavier implements.
Interval for engine oil change - 500 hr.
Interval for hydraulic / transmission oil change - 1,500 hr.
Interval for engine coolant change - 6,000 hr.
Country of manufacture - USA

Compare Models

2025 John Deere 7R 330 w/o Receiver

2025 John Deere 7R 330 w/o Receiver

General Information

Body

Drivetrain

Electrical

Engine

Hydraulics

Measurements

Operational

Features

Features