Compare Models

Features

• POWERFUL TURBOCHARGED DIESEL ENGINE FOR SUPERIOR PERFORMANCE: The 1600 Turbo TerrainCut WAM is powered by a liquid-cooled, turbocharged, four-cylinder, 60-hp (44.7-kW) at 3000 rpm, PS diesel engine.
• EXCLUSIVE AIR-INTAKE SYSTEM DRAWS CLEAN AIR FROM THE TOP OF THE MACHINE FOR CONSISTENT COOLING: An innovative, exclusive air-intake system draws clean air from the top of the machine instead of the rear. This keeps the radiator cleaner and prevents the engine from overheating. The high-capacity cooling system combines the radiator and hydraulic oil cooler.
• MOWER DECKS HAVE MANY PERFORMANCE AND CONVENIENCE FEATURES: The 1600 Turbo TerrainCut™ WAM is equipped with a 62-in. (157.5-cm) center deck and two 42-in. (106.7-cm) wings. Cutting widths are 128 in. (325.1 cm) using all three decks, 94 in. (238.8 cm) using the center deck and either wing deck, and 62 in. (157.5 cm) with the center deck only. All decks are rear discharge. Wings fold for transport and reduce the machine’s width to a narrow 84 in. (213 cm), so it can easily be driven along golf-cart-size paths or fit on a trailer. The wing decks will float 45 degrees above horizontal and 20 degrees below horizontal, following the ground contour.
• STANDARD HIGH-BACK, AIR-RIDE SEAT PROVIDED FOR OPERATOR COMFORT: An air-suspension seat is standard equipment and provides maximum operator comfort across a wide range of operator traits.
• CONTROLS AND INSTRUMENTATION ARE CONVENIENT AND EASY TO FIND: Low-effort controls are conveniently grouped on the right-hand side.
• MAXIMUM PRODUCTIVITY WITH HYDROSTATIC TRANSMISSION AND TRANSAXLE: A hydrostatic transmission is used for reliable operation.
• FEATURES ARE PROVIDED FOR CONVENIENT TRANSPORT: The wing decks rise to a narrow 84-in. (213.4-cm) width and can be locked into transport position. A machine transport speed of 15 mph (24.1 km/h) means the operator can spend less time transporting and more time mowing.
• SERVICEABILITY IS DESIGNED-IN TO REDUCE MAINTENANCE COST AND INCREASE UPTIME: The hood and seat platform open for excellent access to the engine and drivetrain. All daily service points are located on the left side of the machine.
• EXCELLENT PERFORMANCE FROM HIGH-TRACTION TIRES AND LOW-MAINTENANCE CASTER TIRES: Large, 18x9.5-8 steering (rear) and 26x12-12 (front) drive tires provide excellent traction and flotation. Both tires have a six-ply rating.
• TWO-POST FOLDING ROLL-GARD™ ROLLOVER PROTECTIVE STRUCTURE (ROPS): The two-post folding Roll-Gard ROPS and seat belt are standard equipment. When used in combination with seat belts and safe operating practices, the ROPS is effective in reducing serious injuries and death from rollover accidents. The standard-equipment Roll-Gard ROPS can be folded to allow for additional clearance when needed. With the ROPS in the folded-down position, the machine fits under a standard doorway. The ROPS meets the International Organization for Standardization (ISO) 21299 ROPS standard – defined test procedures and acceptance criteria for the rollover protective structures of powered ride-on turf care machinery. Under the support of the Outdoor Power Equipment Institute (OPEI), a panel was formed that brought together an international group of ROPS experts that presented the best-learned practices regarding off-highway vehicle operator crush protection. The result of this undertaking is a standard dedicated to protecting operators of powered ride-on turf maintenance equipment. The ROPS can be folded down without tools for operation under tree canopies or in other confined operating spaces. Operators should leave the ROPS in the upright position for all other mowing: The folding ROPS enhances operator safety and still provides clearance when loading on enclosed trailers. Folding the ROPS is simple - remove two pins and rotate the top of the Roll-Gard ROPS down. Adjustments can be made from the operator's station. The folding ROPS performance is certified at the date of manufacture, per the following standard: ISO 21299.