Compare Models

Home › Brands › Compare Models

2024 John Deere 9RX 770 w/o Receiver in Grand Rapids, Minnesota — 2024 John Deere 9RX 770 w/o Receiver

View Details

Specs
Features

General Information

Manufacturer

John Deere

Model Year

2024

Model

9RX 770 w/o Receiver

Model Code

9910RW

Color

Green

Body

Cab

Suspension - Standard

Inner volume - 119 cu. ft. (3.37 cu. m)

Glass area - 73.81 sq. ft. (6.86 sq. m)

Suspension - Standard

Inner volume - 119 cu. ft. (3.37 cu. m)

Glass area - 73.81 sq. ft. (6.86 sq. m)

Seat Adjustment

Degree of seat swivel, left hand - 8 degree

Degree of seat swivel, right hand - 40 degree

Standard Instructional

Degree of seat swivel, left hand - 8 degree

Degree of seat swivel, right hand - 40 degree

Standard Instructional

Drivetrain

Transmission Type

John Deere e21 21-speed PowerShift; 21F, 11R with Efficiency Manager, 25 mph (40 km/h)

Steering

John Deere ActiveCommand Steering (ACS™)

Drive Type

Camso ® Ag 3500 or 6500 Tracks

Axles

Front / Rear differential lock - Full-locking electrohydraulic

Rear final drive type - Outboard planetary with three planetary gears

Front / Rear differential lock - Full-locking electrohydraulic

Rear final drive type - Outboard planetary with three planetary gears

Tires

Tread spacing - 88 in. (2,235 mm)

Mid-rollers - Three

Tread spacing - 88 in. (2,235 mm)

Mid-rollers - Three

Electrical

Electrical System

Type of bulb in headlight - Halogen, 65W

Total cold cranking amps - 5 x 925 CCA (Total: 4,625 CCA)

Type of bulb in headlight - Halogen, 65W

Total cold cranking amps - 5 x 925 CCA (Total: 4,625 CCA)

Instrumentation

Display - 12.8 in. (32.5 cm) G5Plus CommandCenter™

Battery

12V

Alternator

330A

Engine

Engine Type

In-line six, six-cylinder

Rated speed - 1,900 rpm

Emission level - Final Tier 4 (FT4) / Stage V Compliant Diesel Engine

After treatment type - Exhaust Gas Recirculation (EGR) - No Diesel Exhaust Fluid (DEF) used

In-line six, six-cylinder

Rated speed - 1,900 rpm

Emission level - Final Tier 4 (FT4) / Stage V Compliant Diesel Engine

After treatment type - Exhaust Gas Recirculation (EGR) - No Diesel Exhaust Fluid (DEF) used

Cooling

Air-to-air aftercooling and cooled exhaust gas recirculation (EGR)

Aspiration

Dual turbochargers in series; Primary fixed displacement turbocharger and secondary wastegated turbocharger

Torque

Engine peak - 2,897 ft. lb. (3,928 Nm) @ 1,400 rpm

PTO rise - 38 percent @ 1,400 rpm

Engine peak - 2,897 ft. lb. (3,928 Nm) @ 1,400 rpm

PTO rise - 38 percent @ 1,400 rpm

Gross Horsepower

Rated power - 770 hp (566 kW)

Maximum - 847 hp (623 kW)

Power boost - 10 percent

Rated power - 770 hp (566 kW)

Maximum - 847 hp (623 kW)

Power boost - 10 percent

Cylinders

Liners - Wet-sleeve

Engine Model

JD18 (John Deere 18L)

Engine Make

John Deere

Displacement

17,993 cc (1,098 ci)

Fuel Tank Capacity

515 U.S. gal. (1,952 l)

Crankcase oil volume - 18.9 U.S. gal. (71.5 l)

Cooling system - 30.9 U.S. gal. (117 l)

Transmission-hydraulic system - 53 U.S. gal. (201 l)

515 U.S. gal. (1,952 l)

Crankcase oil volume - 18.9 U.S. gal. (71.5 l)

Cooling system - 30.9 U.S. gal. (117 l)

Transmission-hydraulic system - 53 U.S. gal. (201 l)

Hydraulics

Pump

Number of rear selective control valves (SCVs) - Four 1/2 in. (1.3 cm) couplers

Standard Pump Flow

Rated output (Single) - 56 gpm (212 lpm)

Rated output (Dual) - 112 gpm (424 lpm)

Rated output (Triple) - 168 gpm (636 lpm)

Rated output (Single) - 56 gpm (212 lpm)

Rated output (Dual) - 112 gpm (424 lpm)

Rated output (Triple) - 168 gpm (636 lpm)

Hydraulic System

Axial piston, closed-center, pressure-and-flow compensated, naturally-aspirated

SCV control - Electronic

Axial piston, closed-center, pressure-and-flow compensated, naturally-aspirated

SCV control - Electronic

Measurements

Length

Overall - 28.75 ft. (8,829 mm)

Track Width

30 in. (762 mm)

Wheelbase

Distance from the center of the front drive sprocket to the center of the rear drive sprocket - 15.2 ft. (4,620 mm)

Weight

Approximate shipping - 74,000 lb. (33,500 kg)

Base machine - 74,000 lb. (33,566 kg)

Maximum ballast level - 76,000 lb. (34,500 kg)

Approximate shipping - 74,000 lb. (33,500 kg)

Base machine - 74,000 lb. (33,566 kg)

Maximum ballast level - 76,000 lb. (34,500 kg)

Turning Radius

With brakes - 22.3 ft. (679.5 cm)

Ground Clearance

Drawbar - 22.3 in. (567 mm)

Operational

Power Take-Off

45 mm (1.75 in.) 20-spline, 1,000 rpm

Actuation - Electrohydraulic

45 mm (1.75 in.) 20-spline, 1,000 rpm

Actuation - Electrohydraulic

PTO Horsepower

Rated (SAE) - 335 hp (249 kW)

Hitch

Drawbar - Category 5

Maximum vertical load - 19,000 lb. (8,618 kg)

Drawbar - Category 5

Maximum vertical load - 19,000 lb. (8,618 kg)

Features

MAX LOADS, MAX SLOPES, MAX SPEEDS: Reduce the number of times you need to fill up your cart each day. Fill it full every time and don’t worry about what operator is in the seat when you reach the hills. With 38,102 kg (84,000 lb), 619 kW (830 rated engine hp), and Auto Mode just select you set speed and let the tractor do the rest.
DO MORE WITH LESS: The 9RX 710, 770 and 830 give you the power needed to increase implement width, maintain consistent depth and eliminate passes which helps reduce the amount of soil compacted each season. Let John Deere help you get all your stalks ripped before the ground freezes or stay ahead of the planter in the spring.
POWERFUL POSSIBILITIES: The 9RX 710, 770 and 830 give you the power needed to increase implement width and speed, eliminating passes which helps reduce the amount of soil compacted each season. Let John Deere help you quickly create a consistent finish across your field that has all the neighbors asking what piece of equipment you used to get it done.
NEW RIDE, NEW VIEW: The 9RX 710, 770, and 830 Tractors introduce a new in-cab experience. The CommandView 4 Plus cab offers a quiet experience as well as a smooth ride over varying field conditions, allowing for increased confidence and operator comfort in the seat. The CommandView 4 Plus cab removed the right-hand fender, utilized on our wheeled machines, for an increase in 15 percent floor space*, allowing for more leg room as the seat swivels, space for tools, or even your lunch. With the new cab design, there is also a 20 percent increase* on your right-hand side visibility, giving you more glass to see while driving on the road or working in the field, all increasing your confidence in the cab. (*Compared to CommandView 4 cab)
ALL POWER, ONE FLUID: The John Deere 9RX 710, 770, and 830 tractors are powered by the John Deere JD18 (18L) engine. The JD18 engine was designed to meet Final Tier 4 and Stage V emission standards by utilizing Exhaust Gas Recirculation (EGR) technology, allowing these machines to run solely on diesel fuel (no DEF). This allows for increased uptime with one step fueling. Additionally, increase uptime with the Fast Fill System option available on 9RX 710, 770 and 830 models, similar to that of the Fast Fill System available on the X9 combine. This option is available from the factory and allows the 1949-L (515-gal.) fuel tank to be filled in just under 4 minutes*. (*Fast Fill System runs at 568 L/min (150 gpm). For additional information on Fast Fill system, please see Engine Option story in the Engine tile.)
HYDRAULIC FLOW TO HELP YOU GROW: This is flow that will wash the competition away. Don’t compromise on fan speed or tractor speed anymore. This tractor has it all. Not only will it deliver the flow you need today but will also prepare you to have enough flow for future implement needs. The optional Intelligent Power Management (IPM) senses when the pumps are putting out high flow and unlocks up to another 30 kW (40 hp) on the tractor to keep your system at its peak performance.
Fully integrated precision ag technology
Interval for engine oil change - 500 hr.
Interval for hydraulic / transmission oil change - Hydraulic system: 4,000 hr. (Filters at 2,000 hr.), Transmission oil and filters: 2,000 hr.
Interval for engine coolant change - 6,000 hr. or 6 years
Country of manufacture - USA

Features

MAX LOADS, MAX SLOPES, MAX SPEEDS: Reduce the number of times you need to fill up your cart each day. Fill it full every time and don’t worry about what operator is in the seat when you reach the hills. With 38,102 kg (84,000 lb), 619 kW (830 rated engine hp), and Auto Mode just select you set speed and let the tractor do the rest.
DO MORE WITH LESS: The 9RX 710, 770 and 830 give you the power needed to increase implement width, maintain consistent depth and eliminate passes which helps reduce the amount of soil compacted each season. Let John Deere help you get all your stalks ripped before the ground freezes or stay ahead of the planter in the spring.
POWERFUL POSSIBILITIES: The 9RX 710, 770 and 830 give you the power needed to increase implement width and speed, eliminating passes which helps reduce the amount of soil compacted each season. Let John Deere help you quickly create a consistent finish across your field that has all the neighbors asking what piece of equipment you used to get it done.
NEW RIDE, NEW VIEW: The 9RX 710, 770, and 830 Tractors introduce a new in-cab experience. The CommandView 4 Plus cab offers a quiet experience as well as a smooth ride over varying field conditions, allowing for increased confidence and operator comfort in the seat. The CommandView 4 Plus cab removed the right-hand fender, utilized on our wheeled machines, for an increase in 15 percent floor space*, allowing for more leg room as the seat swivels, space for tools, or even your lunch. With the new cab design, there is also a 20 percent increase* on your right-hand side visibility, giving you more glass to see while driving on the road or working in the field, all increasing your confidence in the cab. (*Compared to CommandView 4 cab)
ALL POWER, ONE FLUID: The John Deere 9RX 710, 770, and 830 tractors are powered by the John Deere JD18 (18L) engine. The JD18 engine was designed to meet Final Tier 4 and Stage V emission standards by utilizing Exhaust Gas Recirculation (EGR) technology, allowing these machines to run solely on diesel fuel (no DEF). This allows for increased uptime with one step fueling. Additionally, increase uptime with the Fast Fill System option available on 9RX 710, 770 and 830 models, similar to that of the Fast Fill System available on the X9 combine. This option is available from the factory and allows the 1949-L (515-gal.) fuel tank to be filled in just under 4 minutes*. (*Fast Fill System runs at 568 L/min (150 gpm). For additional information on Fast Fill system, please see Engine Option story in the Engine tile.)
HYDRAULIC FLOW TO HELP YOU GROW: This is flow that will wash the competition away. Don’t compromise on fan speed or tractor speed anymore. This tractor has it all. Not only will it deliver the flow you need today but will also prepare you to have enough flow for future implement needs. The optional Intelligent Power Management (IPM) senses when the pumps are putting out high flow and unlocks up to another 30 kW (40 hp) on the tractor to keep your system at its peak performance.
Fully integrated precision ag technology
Interval for engine oil change - 500 hr.
Interval for hydraulic / transmission oil change - Hydraulic system: 4,000 hr. (Filters at 2,000 hr.), Transmission oil and filters: 2,000 hr.
Interval for engine coolant change - 6,000 hr. or 6 years
Country of manufacture - USA

Compare Models

2024 John Deere 9RX 770 w/o Receiver

2024 John Deere 9RX 770 w/o Receiver

General Information

Body

Drivetrain

Electrical

Engine

Hydraulics

Measurements

Operational

Features

Features