Weight
Impeller conditioner - 4,470 lb. (2,027 kg)
Impeller conditioner - 4,470 lb. (2,027 kg)
Length
Transport - 20.6 ft. (6.2 m)
Transport - 20.6 ft. (6.2 m)
Width
Transport - 8.1 ft. (2.4 m)
Transport - 8.1 ft. (2.4 m)
Tractor Hitch
Tractor connection - 21 spline
Standard - Clevis
Tractor connection - 21 spline
Standard - Clevis
Disc Speed
2,650 rpm
2,650 rpm
Hydraulics
Pressure required - 2,000 psi (13,790 kPa)
Pressure required - 2,000 psi (13,790 kPa)
Tractor PTO Speed
540 rpm
540 rpm PTO, 1-3/8 in. shaft - 55 - 75 hp (41 - 56 kW)
540 rpm
540 rpm PTO, 1-3/8 in. shaft - 55 - 75 hp (41 - 56 kW)
Operating Speed
Knife tip speed - 191 mph (307 km/h)
Knife tip speed - 191 mph (307 km/h)
Cutting Width
8.1 ft. (2.4 m)
8.1 ft. (2.4 m)
Cutterbar
Type - John Deere
Lubrication - Hy-Gard oil
Oil reservoir capacity - 6 U.S. qt. (5.7 l)
Oil check - Combination check, drain plug
Protection - ShearHub
Adjustable gauge shoes
Type - John Deere
Lubrication - Hy-Gard oil
Oil reservoir capacity - 6 U.S. qt. (5.7 l)
Oil check - Combination check, drain plug
Protection - ShearHub
Adjustable gauge shoes
Conditioner
Impeller
Width - 55.2 in. (140 cm)
Tines type - V-tines
Number of tines - 33
Impeller
Width - 55.2 in. (140 cm)
Tines type - V-tines
Number of tines - 33
Cutting Height
1.1 - 3.8 in. (28 - 98 mm) without extensions
2.8 - 6.6 in. (71 - 167 mm) with extensions
1.1 - 3.8 in. (28 - 98 mm) without extensions
2.8 - 6.6 in. (71 - 167 mm) with extensions
Cutterbar Angle Adjustment
Manual or hydraulic
Manual or hydraulic
Cutterbar Angle Range
2 - 8 degree
2 - 8 degree
Conditioner Drive
3-V powerband belt and sheaves
3-V powerband belt and sheaves
Conditioner Diameter
23.4 in. (59.4 cm)
23.4 in. (59.4 cm)